Archive for the ‘darkroom’ Category
This vlog should be published earlier, but I am missing three of my cameras. All small ones, like analogue compact Rollei camera, GoPro 3+ and Nikon J5 cameras. I have no idea what happened to them. In 30 years I have not lost a camera. I almost did, but never really. This small cameras were in my bag and I was carry them always with me. It might be that I forgot my backpack somewhere, but is more likely that someone took it out of my car. Today’s thieves do not need to brake a window, to get in your car. When I went to Prague I was resting on a rest stop and a thief silently broke in my car, without leaving any damage or signs. He did this while I was resting in the car! But then I woke up and he fled. Without steeling anything. So it might be that it was stolen or not. I do not know. Too many things happening in my life right now and this is the price to pay. Although this event is annoying it does not put me off. In fact that is why I bought Nikon J5, because I didn’t want to use the almighty and all expensive Nikon D4! Imagine that would happen with my Nikon D4 and my expensive lenses!
Anyway… Here is my latest vlog where I continue working on my book A Father’s Tale. A photo-book is not an album of images. It is a sequence of images carefully narrated through each page. Just like when music notes are containing parts that are actually bringing the orchestra to quit down or even to a complete stop, also photo-book must have parts in the book where an eye will relax, digest, reflect.
My idea is that the photo-book of my daughters should contain images that on information level do not tell you anything about them, but the images are containing certain mood that is bringing the viewer’s attention away from the information level and building the story on emotional level.
So that is why I’ve decided to photograph this window. I could ask one of my daughters to stand there or even I could stand by the window, but I’ve decided to keep it calm and simple. It is just one image in the book, but important one.
I hope you will like the image and the video. Please subscribe and share. My plan is to build up large enough social network and sell my books directly to my audience. And/Or with the large enough social network, main stream publishers will be interested in publishing the book. So thank you for subscribing to my YouTube channel, to my blog, to FB page and to my Instagram.
LINK to eBay listing of the silver-gelatin print
LINK to eBay listing of the ambrotype
LINK to eBay listing of the albumen print.
here is my newest vlog. In December I’ve been travelling from Slovenia to Tuscany and then to Berlin and Hamburg. Proper south – north EU tour. I drove like 4000 km or so. Finally I’ve made the vlog from north part of the trip, but southern part is being edited. It takes whole lot of time, these videos.
This video is kind of personal, not much photography tips&tricks involved. Is that OK? I’m thinking to do separate my personal vlogs and tutorial videos. Vlogs will be shorter and more funny, whereas tutorial videos will be longer and more detailed.
In this video I’m talking about the cold, that consist of two components. One is low temperature and the second is interpretation of the low temperature. It is talking about the reality and interpretation of the reality. Cold is perfect example how we love drama and how that drama is making us just more dependent on the comfort thqat seize to be comfort, but it becomes necessity and comfort becomes something else, like a super-car or something that is beyond our reach. Perfect formula for personal drama! But the bottom line is that what I’ve wrote about the cold goes for everything in the world. You may ask yourself which part of the circumstances are real concern and which part is a drama that I am addicted to. I am not pretending to be beyond it, on the contrary, these insights are very personal and very real life situations. Cold is just the easiest to be identified with so I leave you to ponder that for a moment and I’m challenging you to copy/paste the insight on whatever life situation you are in at this particular moment, at this particular drama.
OK, I’ve printed an edition of 50 prints and 14 are still on sale, that is from edition of 32/50 to 48/50, with exception of 36 and 42. Those copies I’m keeping them. The price is 50 EUR per print, it is signed, numbered, unmated, in a sleeve, with a sheet of data in the back.
HERE is the link to the listing. It is limited edition and only 13 are available. A big thanks to my patreons, who are gfenerlously supporting me every month. Perhaps you might join them and you will receive a print in the mail later this year! WWW.PATREON.COM/BORUTPETERLIN
In this episode of my vlog, I’ve started a collaboration with my daughters in my photography project A Father’s Tale. I’ve been talking before about my project, but now, when I am in the middle of divorce, I’m bonding with my kids in this kind of creative way.
The prints we’ve created are listed on Ebay, as an auction, so I thank you for bidding, liking and sharing my videos. I thank my patreons who are supporting me monthly via platform PATREON.com.
Music by: David Cutter Music – www.davidcuttermusic.co.uk
Let me invite you to the opening of my solo exhibition on 3rd of November 2016, at 17.00 at Ventúrska 5, 813 15 Bratislava, Slovakia.
And I can not part by not announcing a workshop in Florence, Italy, on 16th and 17th of November. The workshop will be on wet plate collodion negative and salt printing. More info on firstname.lastname@example.org
as I’ve promised I’m publishing my third episode (I count also the episode zero) of my vlog while pursuing my goal to publish an artist photo-book. Of course, the theme of my book will be Kočevski rog woodland and this time I went to one of the most beautiful places, Ponikve valley.
I was wondering how long should my vlog videos be and what should be the mix of entertainment and informative content. This is what I think it’s good. Please let me know your opinion. In each episode I will include a tip or two about the process, but the main topic will be artistic vision, composition, asking questions and the search for answers. Just don’t ask me to do camera review blogs, they are boring. Photography and cameras is like traveling and wheels. It is related, but not dependent upon. I will do a book review, here and there, but not one of those 100 famous photographers everybody know. I will rather do a review of work that nobody knows, like I’ve done from Peter Župnik, Herman Pivk and many others. Basically photographers whose quality does belong on top 100 list, but they will never be world famous photographers, because of circumstances.
I’ve described my intention in the previous blog post, but let me highlight that I haven’t realised before, but all the likes and shares are well important, since the large social network is the guarantee that my book will actually be published, so thank you in advance! So if you think this content is worthy, please press like and share it. If I’ve made your day, please you could buy me a cup of tea every month via my PATREON page and if you could afford, thank you for bidding on my Ebay auction.
I thank David Cutter for the music and Fiona Cambell for the disclaimer voice.
So I’ve received a request if I’m selling also ambrotypes. I don’t because ambrotypes are unique, there is only one and once it’s sold I will never see it again. But I’ve replied that I do sell pre-ordered ambrotype. So when I will go outside next time, I can make an additional ambrotype for a client. If the client likes it, he or she buys it, if not, no problem at all, no questions asked. And pre-ordered ambrotype is also sold for much less I would usually charge.
So here is the result. The client asked if he can buy it in wooden box and so I’ve done some research, I’ve made a boxe from pine-wood and even blast-sanded it. It’s massive wood (not glued wood boards) and pine wood is known for it’s tensions, so it bended. For the next box I’ve chosen cherry wood and this was much better. The final touch is the trophy plate with engraved information about the plate and my signature. How do you like it?
In this video I’m making carbon prints. I love carbon prints. I think it’s the best that photography as a medium can offer. Of course this is a subjective opinion, but please object only if you have seen a good carbon print on glass – in person. It’s translucent silkiness of carbon prints can not be compared with any dot-on-paper principle printing process. It’s unique.
To fund my work I have to sell these babies. The carbon print on paper is listed HERE and the carbon print of glass is listed HERE.
I have a stupid anecdote to share. We had an attempt of burglary in our house. The attempt failed, since I had my German Shepherd – Mike in the house and that convinced the thief to retreat. After that I thought, shit I’m keeping all my savings in a drawer! I must hide it somewhere. And I did. And the very next day I didn’t remembered where I’ve hide it, now I’m totally without any cash whatsoever. Luckily I have some money on my paypal, so I can fill up the gap and pay the bills, but
imagine how stupid do I feel! Plus I searched the whole house again and again, but without success. Anyway I’m telling you this because I do feel stupid and I want to “enjoy” the suffering so much that I will never repeat it again!
ON THE WET PLATE COLLODION AT -9C
OK, I’ve done three videos on the subject how to do wet plate collodion at cold temperatures and none of them covers the all aspects. It’s impossible to cover all the aspects because everything needs to be reevaluated. Ditch the timer, you don’t need it. For instance in collodion manuals it is usually written that sensibilization time is 3 minutes for ambrotype. The truth is that the sensibilization time varies on the working conditions, the acidity of the silver bath, the strength of silver bath, the freshness of the silver bath, the level of iodine in silver bath and so on. What I learned from Mark Osterman is to evaluate the sensibilization visually. Do this tests and you will appreciate his wisdom.
- pour the plate and dip it in silver nitrate bath as you usually do.
- after 40 seconds, in safelight conditions, take the silver-plate out and look at it, then immediately dip it back in siverbath.
- repeat after 90 seconds, 120 seconds, 180 seconds
- observe how the surface of the plate is changing. You will notice the following pattern. At the beginning silver will be on the plate in drops, very oily kind of pattern. Then longer it will stay in the silver-bath, collodion will accept more of the silver-nitrate, more smoother the silver will flow on the surface of the plate.
- when there is no more silver drops on the collodion plate, when silver nitrate flows smoothly, the plate is ready to be taken out.
- In some cases, when I had 9% solution, that was freshly boiled and working in temperature of 25C and I was agitating a bit, the sensibilization times were less then a minute! In times when it’s cold, times might be 6 minutes. Of course judging visually!
So this is the most important advice I want to give you. Of course take special attention to poured on plate, if collodion has set. Touch the pouring corner and if finger-print is overflown by collodion again, then wait few more seconds and repeat the test and when you can see that the collodion does not flow anymore, then dip it in silver nitrate. You might make a collodion that has solvents in ratio 65% of ether, 35% of alcohol. It will dry faster, but I work with my usual 50:50 ratio. During summer I do change the ratio to 30 ether : 70 alcohol. Plus more ether makes better ambrotypes, more alcohol makes better negatives. (More in the Collodion Manual)
I can not tell you the time of development, nobody can, you have to judge it visually. Of course if you’re an avid collodion photographer you do this routinely. If you are not, let me say few words. When you pour developer, observe the plate, count seconds loudly. So when the highlight will start to appear, multiply the time with three. So if the highlights are there already at 4 seconds it will be around 12 seconds. If the highlight will start to appear at 10 seconds, the developing time might be more like 30 seconds. OK, when I say highlight, it can be highlight of a face or a sky. Of course sky will appear much faster then a highlight patch on a nose, so take my advice on seconds approximately.
At freezing point I usually have 10 gr of ferrosulfate in 100 ml of developer. If it’s hot I reduce it down to 3,5 gr.
Heating plates and chemistry
I don’t recommend it. If you do not have a camper with permanent heating, then I don’t recommended. Because the heating will cool down, so you will not have a steady temperature and your results might be all over the place. My advice is that you do not heat up anything, so you will have steady temperature, which might be -5C, but at least when you will figure it out, you will have steady working conditions! The worst is that you get a good result, but then the temperature of your chemistry has dropped and you will have different results and there are so many variables, that it’s very likely you will get many problems. The only heating I recommend is long underwear and double socks.
In the video I forgot to put table salt in my water. One teaspoon of table salt will prevent water from freezing even at -6C. I’m adding salt even during hot temperatures, because salt will react with silver-nitrate and stop developing process immediately, thus clear blacks.
That’s about it! Enjoy making ambrotypes or better ambroice, a term coined by Scott Anton.
Last but not least, I thank you for supporting my videos, blog posts and my work on general. You can do that by becoming my Patreon, bidding on my ebay auctions, buying work from me directly, taking my workshops or even sending me a tip on paypal directly. My paypal address is borutpeterlin and every cup of tea is welcome. As I confessed I developed a habit – being an artist…
Again I’m making an Ebay auction and again I’m listing prints that are by my opinion perfect! I hope you like the making-of-video and if you think it’s worthy don’t forget to subscribe, like and share.
And as always: TOPSHIT HAPPENS!!!
Oh, I am so happy with this dark-box I’ve done in the last few days. In October 2014 I’ve bought a Land Rover Series 3 from year 1972 and it took me more then half a year that I started to trust the car and foremost my ability to fix it, or more often then not, recognising I need a help from a friend to do the maintenance of the truck.
I so much love photographing outdoor, especially documentary photography and you know how annoying is to do it in wet plate collodion process. Sure I’ve done it many times, you can get to a location, set up a tent and you work whole day at the location, clean the stuff and go home with bunch of plates. In the last four years that I do wet plate collodion photography, only twice it happened that I’ve set up a tent, took few plates, cleaned the place up, move to another location, set up the tent, do another bunch of plates, clean it and go home. It is so exhausting this moving. And moving a dark-box or a tent is not a problem, it’s to pour back all the chemistry, prepare it for transport… ARGHHH!!!
I had in mind for a long time a wet plate collodion mobile, a car that it will have a dark box and most importantly all other chemistry prepared in such a way that I would stop the car, set a camera, pour the plate, develop a plate and move to another location. I know few people have camper vans or even trailers, which is fantastic, but not suitable for my environment, not suitable for motifs I want to photograph.
Land Rover, Series 3, 109 LWB, Station Wagon, an old-timer from 1972 is perfect for my needs. It’s cheap to buy, it’s cheap to maintain (parts are cheap, but you have to do the mechanical work by yourself or go bankrupt), it’s almost free to insure and foremost it looks good on you! Sure it’s not cheap to drive, it burns 13 litres of petrol per 100km (USA: 18 mpg), but it’s not a car for daily use, it’s a tool! I drive it about once a week down to the river or up into forests, near my house, to bring all the equipment, I rarely make a trip longer then 100 km. You don’t want to drive long time with this car!
Anyhow now I’m happy with my dark box. I need to make another shelf beside the dark-box on which I will have a bath with fixer or humectant and a box to store clean and exposed plates. On top of everything I can make a bed in my car! I can easily make a bed size 135cm x 180cm. OK, if I will have a dark box inside, it will be 50 cm narrower, but still plenty of space. When I was in Vienna PhotoBook Festival, I was camping inside the truck and had also a cooker for making soups, tea and other tasty meals. The dark box can be used also on the roof rack as a crate for storage.
Today I’ve made a quick test before lunch to see if window is properly filtering daylight and I’ve made this wet plate collodion negative. It’s done with Kodak Folding Brownie 3A, from year 1905, it was one of the first compact cameras in the world! Amazing camera, I love it so much. The most important is that I’ve made the plate in about half an hour with all the setting up and going back home to catch the lunch. This Land Rover and the dark box is the most important tool I have! It will make a wet plate collodion process natural and easy. So happy!
Last but not least, my new year’s resolution is to make more videos and blog posts. I am amazed how many people are following me trough social network! The Ebay auctions are going good, the last one reached about 230 EUR and then I’ve sold another copy of the print to an Italian bidder that lost a bidding against a bidder from USA. Of course the second albumen print from the last auction was sold for slightly higher price then the wining bid was. If I add up the support from my patreons and the commissions that I receive in Slovenia and workshops I have, I must say it’s going great. I want to thank you, by revealing my craft secrets, that I have none, inspiring others and being inspired by others.
Thank you and remember topshit 2016 happens!
Here is a shot that is really dear to me. I grabbed my second favourite middle format camera FUJI GSW III 690 and some infrared film and decided to have some fun time it in the forest. And oh, I had also iPad, so this film happened.
This blog and videos are crowd-funded, through Patreon platform. I’ve started only a month ago and this month I could buy 200 gr of silver nitrate with your donations. I will do my best to deliver and over deliver my promises. If you can spare a dollar, five or more per month, it would be most appreciated to make more videos with this kind of content.
(OK, less mushrooms and more bears, got it!)
And oh, don’t forget to subscribe to my youtube channel. Only lately I have learned that it’s jolly good to have a subrscriber or two on your youtube channel, but I guess you know better then myself, because I equally shocked I’ve learned that I have already 1673 subscribers. Look mom, I’ve made it!
And if you are on it, I also started a FB page, Topshit Photography, don’t forget to tap my ego there too. LINK.
PS: OK, I wanted to list the print on ebay as an auction, but I was reluctant to, but I received a request to do so, so I’ve done it! Here it is. I do follow a spiritual motto:
Everything is on sale except my kidneys! (officially)